The codes for a Jumbo Universal Remote for your TV can be found using this link: www.vat19.com/dvds/jumbo-universal-remote-manual.pdf
This pdf is the complete operational guide for a Jumbo Universal Remote and contains all of the instructions and codes. It covers the battery installation, which can be easily overlooked due to the fact that most people presume they can do themselves. Next the pdf then covers an important feature, the LED indicator which will light up in a certain way to provide you with feedback that what you are doing is correct during the programming of the code. It also blinks when the Jumbo Universal Remote is in programming mode and in menu mode. There is also a picture of the remote with directional indicators to name each button that you will need to program it to your TV.
You now have to find the right code from the list given which is organized in alphabetical order so you can find your TV make and model easily, the code will be next to it. The instructions now state that once you have the correct code that you should then press and hold the code search button until the red indicator stays on, you then release the code search button.
You then enter the three digit code you have chosen from the code tables. If you enter a valid code entry the red indicator will turn off. If you enter an invalid code the red indicator will flash. Now with your device turned on, press the channel up button. If your TV responds then no further action is required, but if it does not then you need to redo all of the steps again. You do have to check though because if you find that it does not operate all of your equipment then you will need to try out a different code.
Now if you find that your TV or other electrical device, still does not respond after you have tried all of the codes for your brand or if your brand is not listed then there is another way. You do this by manually turning on your TV, VCR, DVD etc, and then press and hold the code search button until the red indicator stays on, then release the code search button. Now face the remote towards the device and press the power button and release till the power on the device turns off. If there is still no response then press channel up button repeatedly until the device you want to control changes channel. If you accidentally overshoot the codes required then press the channel down button which will back trap you through the library until the device changes the channel.
The next step is to press and then release the mute button to install the code, now test all the other buttons you need such as volume up and down to ensure you have got the right code finally and the Jumbo Universal Remote now works.
This pdf is the complete operational guide for a Jumbo Universal Remote and contains all of the instructions and codes. It covers the battery installation, which can be easily overlooked due to the fact that most people presume they can do themselves. Next the pdf then covers an important feature, the LED indicator which will light up in a certain way to provide you with feedback that what you are doing is correct during the programming of the code. It also blinks when the Jumbo Universal Remote is in programming mode and in menu mode. There is also a picture of the remote with directional indicators to name each button that you will need to program it to your TV.
You now have to find the right code from the list given which is organized in alphabetical order so you can find your TV make and model easily, the code will be next to it. The instructions now state that once you have the correct code that you should then press and hold the code search button until the red indicator stays on, you then release the code search button.
You then enter the three digit code you have chosen from the code tables. If you enter a valid code entry the red indicator will turn off. If you enter an invalid code the red indicator will flash. Now with your device turned on, press the channel up button. If your TV responds then no further action is required, but if it does not then you need to redo all of the steps again. You do have to check though because if you find that it does not operate all of your equipment then you will need to try out a different code.
Now if you find that your TV or other electrical device, still does not respond after you have tried all of the codes for your brand or if your brand is not listed then there is another way. You do this by manually turning on your TV, VCR, DVD etc, and then press and hold the code search button until the red indicator stays on, then release the code search button. Now face the remote towards the device and press the power button and release till the power on the device turns off. If there is still no response then press channel up button repeatedly until the device you want to control changes channel. If you accidentally overshoot the codes required then press the channel down button which will back trap you through the library until the device changes the channel.
The next step is to press and then release the mute button to install the code, now test all the other buttons you need such as volume up and down to ensure you have got the right code finally and the Jumbo Universal Remote now works.
