Programming a Brightstar remote control is extremely simple, providing you have the 4-digit code of the device you are trying to program it to, however, finding the code can often be the difficult part. The remote should have come with a list of codes for virtually every device. If not, his PDF file is extremely useful for when you are formatting your remote to either your TV or any other device. It contains the 4-digit codes of most devices that you need to enter as it contains all the necessary codes. Press ‘Ctrl’ and ‘+’ to zoom into the file. www.att.com/support_media/images/pdf/uverse/set-up-code-list This PDF was not specifically devised for the Brightstar remote, but they should be the same. Once you have the code, you can begin the programming process.
First of all, switch on your TV or the device you are programming to your remote. Hold down the TV button on the Uverse remote, or the corresponding button for any other device. While you are holding down the button, press and release the OK button and the mode keys should flash twice if you have done this correctly. You then need to enter the 4-digit code that corresponds with the device you programming to the remote. The TV mode button should then flash twice to indicate that the process was successful and you should be able to turn off your TV using the Brightstar remote. If this does not work, it probably means that you have the wrong code.
It is possible to manually search for the code for the device you are wishing to programme. To do this you must hold down the TV button, press and release ‘OK’, type in 922 and then hold down the ‘Play’ button. The remote should then cycle through various codes until it eventually finds the code for your device, in this case your TV, which will eventually turn off and you will know you have the right code. When the TV turns off, press ‘Enter’ on your remote will be programmed.
First of all, switch on your TV or the device you are programming to your remote. Hold down the TV button on the Uverse remote, or the corresponding button for any other device. While you are holding down the button, press and release the OK button and the mode keys should flash twice if you have done this correctly. You then need to enter the 4-digit code that corresponds with the device you programming to the remote. The TV mode button should then flash twice to indicate that the process was successful and you should be able to turn off your TV using the Brightstar remote. If this does not work, it probably means that you have the wrong code.
It is possible to manually search for the code for the device you are wishing to programme. To do this you must hold down the TV button, press and release ‘OK’, type in 922 and then hold down the ‘Play’ button. The remote should then cycle through various codes until it eventually finds the code for your device, in this case your TV, which will eventually turn off and you will know you have the right code. When the TV turns off, press ‘Enter’ on your remote will be programmed.
